Clogged drains are a common problem that many people will encounter at one time or another. These mishaps may be stressful, but many clogs can be easily fixed at home using a plunger. You don’t need to be an expert on how to plunge your own toilet, sink, or tub. These tips will help you get started.
First, ensure you are using the correct type of plunger.
Two types of plungers are essential to have in your home: a cup and a flange.
When you think of plungers, the classic cup plunger will be the first to come to mind. It’s well-suited for creating suction on a flat surface and is best suited for this purpose. The cup plunger is your best choice for tubs and sinks.
Cup plungers are different than flange plungers. They have a series accordion-like pleats as well as a longer rubber lips. These features combine to provide better suction when used in the more dramatic curves of a bathroom bowl.
Please note: Never use the same plunger to drain your sinks as your toilet. You could spread fecal bacteria into other areas of your house, including your kitchen. Yuck!
Avoid using corrosive chemicals before plunging.
This tip is crucial because safety is at stake. You don’t want droplets of liquid to splash you while you plunge. You also run the risk that certain drain cleaners can damage your pipes. It is better to stay clear of these cleaners.
Tips for the toilet
Before you plunge, make sure you have enough liquid in your bowl. You can drain the liquid from your John by putting it in a plunger.
You’ll still need liquid to cover your rubber lip on the flange plunger. Add a bit of water to the bowl to ensure adequate suction.
Your flange plunger can be used to seal the bottom of your toilet bowl. Then press and lift the lid repeatedly, without breaking the seal. You will need to apply suction and forceful thrusts in order to loosen the clog so it can be flushed.
If air bubbles are appearing when you push the plunger, you will need to adjust your seal and retry.
Tips for tubs
This is where you will need to grab the cup plunger, which many mistakenly think they use as a toilet. To seal your drain, use a plug or a wet towel.
Make sure that your plunger cup is fully submerged in water. Push it gently once or twice to get rid of excess air. To dislodge the blockage, place the plunger over the drain. Push it down and forcefully without breaking it (just like you would in a toilet bowl).
Tips for sinks
You can plunge sinks in the same way as tubs but will need to clear the counter space first. The act of plunging can cause a lot water to be lost, which can lead to a lot more messy splashing in small vessels like a sink bowl.
If you have two bowls in your sink, seal the drain on the side that is not being used with an airtight lid. You won’t be able create enough suction when you plunge.
Remember:
Sometimes those stubborn clogs won’t move despite your best efforts. Tapron Plumbing can help you diagnose any plumbing issues in your home.
No comments:
Post a Comment